Hold the outer protective case (sleeve) and carefully pull out the small glass roller bottle. Set the sleeve aside as you will need it again later.

Gently pull the small round cap with the roller ball off the bottle. It may be firmly attached so pull straight up with a slight twisting motion if it does not come off immediately.

Remove the cap from your perfume bottle and place the included spray nozzle (adapter) firmly onto the spray opening. This creates a directed stream that allows you to fill the roller bottle precisely.

Hold the roller bottle at an angle under the spray nozzle and pump until filled to 2ml with perfume. Use the marking on the side of the bottle as your guide.

Use the included perfume extender to enhance the scent or extend its longevity. Do not fill to the rim as the roller cap needs to fit back inside the bottle.

Press the roller cap firmly back onto the bottle until you feel a click or until it is securely attached. Check that the cap is straight and not crooked as this could cause perfume to leak.

Slide the filled roller bottle back into the protective sleeve. The sleeve protects against light and impact and makes the bottle easier to grip.

Shake the bottle gently back and forth a few times so that the perfume and any extender mix well. Then wait 1 to 2 minutes before use as this gives the fragrance time to stabilize.